Instead of sending data to services in the cloud, here we send sensor data to local InfluxDB database. Grafana is used to read data from InfluxDB and alert thresholds are set to send reactive alerts. InfluxDB Download and Installation: official docs Docker Download and Installation: official docs ESP32 connecting to WPA2-Enterprise Hardware ESP32 TTGo T-Energy SSD1306 OLED display BME280 sensor Software Dependencies Listed below are the dpendencies used by Arduino IDE, but use PlatformIO instead!...
Walkthrough of minimal settings for ESP32 to connect to WPA2-Enterprise WiFi at University of Michigan (eduroam) GitHub: debsahu/Esp32_EduWiFi Minimal settings for ESP32 to connect to University of Michigan WiFi (MWireless/eduroam) MSetup Go to MSetup Log in using University of Michigan credentials Select Other Device and log in again if needed Enter Device Name, MAC Address, uniqname will already be selected, Advanced Options > Network Type > Internet Access After above settings are enterd, click on Register my device...
Permanent holiday lights hardware and software setup using NeoPixels/WS2812B LEDs Hardware LEDs: https://amzn.to/2Lu4m3P Aluminum Channels: https://amzn.to/2Knajio 18/2 wire: https://amzn.to/348I1zq 18/3 wire: https://amzn.to/37YNCJM Control Box: https://amzn.to/2KjfakW 5v 60A Power Supply: https://amzn.to/2KmRHiu 25ft extension cord: https://amzn.to/3840RIS Wire nuts: https://amzn.to/3oO1Vrb BME280(optional): https://amzn.to/3p15pHd PCB: https://github.com/toblum/McLighting/tree/master/documentation/pcb Software WELD - GitHub: Aircoookie/WLED WLED User-mod for BME/P 280:
Board Prep WLED Software: GitHub: Aircoookie/WLED PCB: https://github.com/toblum/McLighting/tree/master/documentation/pcb
WLED Software: GitHub: Aircoookie/WLED PCB: https://github.com/toblum/McLighting/tree/master/documentation/pcb
Building a Home Assistant controlled ESP32 based controller for deck LED lights via ESPHome. Software: ESPHome
DIY Faux wood-beam lights mode from cedar fence pickets. Light is controlled by Sonoff Mini. Pendent Lights: amazon Software: ESPHome
Using an ESP8266 with PCM5102 to play MP3 files stored in SPIFFs. There is a motion sensor to trigger playback and LEDs for Halloween effects. GitHub: debsahu/HalloweenESPSpeakers Using an ESP8266 with PCM5102 to play MP3 files stored in SPIFFs. There is a motion sensor to trigger playback and LEDs for Halloween effects. Wiring [PCM5102 DAC > ESP8266/NODEMCU] VCC > 3.3 3.3V > 3.3 GND > GND FLT > GND DMP > GND SCL > GND BCK > GPIO15/D8 (I2S CLOCK) DIN > GPIO3/RX (I2S DATA) LCK > GPIO2/D4 (L/R CONTROL) FMT > GND XMT > 3....
Using ESPHome for connecting ESP8266 to MAX7219 Dot-Matrix Display to show useful information from Home Assistant. This is used by my wife’s channel Canvasyvibes Art Software: ESPHome
Install of Biobidet Bliss BB200 and connecting it to Home-Assistant. Wilbur Sargunaraj Software: ESPHome