Integrating PM 2.5 sensor (VINDRIKTNING) into Home Assistant

ESPNow connectivity for the Ikea VINDRIKTNING Most of the code is borrored from Hypfer/esp8266-vindriktning-particle-sensor that uses an ESP8266 to read from GPIO14(RX) and send via ESPNow to a EspNow Server (check debsahu/ESPNowMQTT), which sends it out to a MQTT broker. Hardware IKEA VINDRIKTNING ($11.99) ESP8266 ($2.00) Dupount cables ($0.50) Soldering Iron & solder Connections 5V on VINDRIKTNING to 5V on ESP8266 VIN GND on VINDRIKTNING to GND on ESP8266 GND REST on VINDRIKTNING to GPIO14 on ESP8266 Original idea from Home Assistant Thread GitHub: Hypfer/esp8266-vindriktning-particle-sensor ESPHome code ESPHome PM1006 Example ESPHome Config/Code ESPNow code Source: GitHub: debsahu/esp8266-vindriktning-particle-sensor...

November 21, 2021 · Debashish Sahu

Energy Monitor | Emporia Vue in Home Assistant

Using Emporia Vue to monitor enegry usage of whole house and several branches in the house. Emporia Vue Home Assistant Intergration GitHub: magico13/ha-emporia-vue

November 14, 2021 · Debashish Sahu

Rainbird Irrigation into Home Assistant & Full tutorial on Winterization

Here I add WiFi LNK module to my ESP-TM2 Rainbird Irrigation System and add the Rainbird integration to Home Assistant. Once completed, I winterize the irrigation system for the coming winter.

November 7, 2021 · Debashish Sahu

Ultimate guide to permanent holiday lights using NeoPixels/WS2812B LEDs

Permanent holiday lights hardware and software setup using NeoPixels/WS2812B LEDs Hardware LEDs: Aluminum Channels: 18/2 wire: 18/3 wire: Control Box: 5v 60A Power Supply: 25ft extension cord: Wire nuts: BME280(optional): PCB: Software WELD - GitHub: Aircoookie/WLED WLED User-mod for BME/P 280:

December 13, 2020 · Debashish Sahu

Epoxy resin holiday lights/night lamp | DIY resin LED decor | WLED

Board Prep WLED Software: GitHub: Aircoookie/WLED PCB:

December 8, 2020 · Debashish Sahu

ESP8266 based WLED NeoPixel Lights | Insomnia soldering session | Holiday lights prep

WLED Software: GitHub: Aircoookie/WLED PCB:

December 2, 2020 · Debashish Sahu

DIY Smart Deck Lights | ESPHome | Home Assistant controlled

Building a Home Assistant controlled ESP32 based controller for deck LED lights via ESPHome. Software: ESPHome

November 30, 2020 · Debashish Sahu

DIY Smart Wooden Faux Beam Pendent Lights | ESPHome | Smart Plant Lights | Home Assistant controlled

DIY Faux wood-beam lights mode from cedar fence pickets. Light is controlled by Sonoff Mini. Pendent Lights: amazon Software: ESPHome

October 24, 2020 · Debashish Sahu

ESPHome Dot Matrix Display | Internet Connected Display Home Assistant Display

Using ESPHome for connecting ESP8266 to MAX7219 Dot-Matrix Display to show useful information from Home Assistant. This is used by my wife’s channel Canvasyvibes Art Software: ESPHome

October 4, 2020 · Debashish Sahu

Voice Controlled (Connected) BIDET: A Solution for Non-Availability of Toilet-Paper Caused by COVID19

Install of Biobidet Bliss BB200 and connecting it to Home-Assistant. Wilbur Sargunaraj Software: ESPHome

April 13, 2020 · Debashish Sahu