Projects/IoT & Electronics/How to Build a 3.3V Voltage Re...
February 25, 2017
1 min read
IoT & Electronics
How to Build a 3.3V Voltage Regulator
📺 Watch the Video View on YouTube --- Here are the instructions to wire a stable AMS1117-3.3 voltage regulator properly. This can power an ESP8266 or...
📺 Watch the Video
Here are the instructions to wire a stable AMS1117-3.3 voltage regulator properly. This can power an ESP8266 or any 3.3V micro-controller reliably supporting current draws up to 1A.
Hardware
- •AMS 1117-3.3
- •10 uF Electrolytic Capacitor
- •104 Ceramic Capacitor
Wiring
AMS1117-3.3 (right to left)
- •Pin 1: GND
- •Pin 2: Vout
- •Pin 3: Vin
Connections
- •5-12V -> Vin
- •GND -> GND
- •10 uF Electrolytic Capacitor +ve -> Vout
- •10 uF Electrolytic Capacitor GND -> GND
- •104 Ceramic Capacitor +ve -> Vin
- •104 Ceramic Capacitor GND -> GND